TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34

  TM-9-2350-261-34 - Page 560 of 785

TM 9-2350-261-34
REPAIR TENT (M577A2 AND M1068 ONLY) — Continued
0071 00
20. Install webbing and reinforcements. Machine stitch a rectangular pattern 1/8 inch (3 cm) in from the edges, a set of
stitches 1/8 inch (3 mm) in from end stitchings, and diagonal stitches from corner to corner.
21. Attach all leather reinforcements. Use the same stitching method used for webbing.
22. Install end clips. Insert strap into ball-type end clip. Flatten clip with hammer.
23. Install grommets per FM 10-16. Holes punched in the material to receive grommets shall be smaller than outside
diameter of grommet barrel. Clinch grommets firmly without cutting material.
007100-7


Back to Top