TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 568 of 785

TM 9-2350-261-34

INSTALL CAPSTAN KIT (M113A2 AND M1059 ONLY) — Continued

0072 00

NOTE

Two types of screws are provided in capstan kit. One type of screw is for counterbore holes in

sprocket. The other type of screw is for holes without counterbore construction. Twenty of each

type of screw is provided. Use as applicable.

5.

Remove ten screws (1) from left sprocket (2) and ten screws from right sprocket.

6.

Place two adapters (3) on two sprockets (2).

7.

Secure adapters (3) to sprockets (2) with 20 screws (4). TIGHTEN SCREWS TO 110-115 LB-FT (149-156 N·M)

TORQUE. Use torque wrench.

007200-3