TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 567 of 785

TM 9-2350-261-34

INSTALL CAPSTAN KIT (M113A2 AND M1059 ONLY) — Continued

0072 00

INSTALLATION

1.

Mark cutting lines as shown in the upper view of the correct illustration for your carrier’s shroud cover (left side).

2.

Use hacksaw and cut the front shroud cover as needed, along the cutting lines. The final cut should look like the lower

view of the correct illustration of your carrier’s shroud cover (left side).

4.

Smooth out any sharp edges that may remain on the shroud cover with a round file.

0072 00-2

NOTE

There are two configurations of the shroud cover installation. They are shown below. Before

cutting, select the one that your carrier has.

3.

Repeat Steps 1 - 2 on the right side of your carrier.