TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 673 of 785

TM 9-2350-261-34

REPAIR TENT INTERFACE PANEL BOX ASSEMBLY A5 (M1068 ONLY) — Continued

0089 00

NOTE

Tag all leads before disconnecting from connectors. Use wiring diagram (page 0089 00-6).

3.

Remove four locknuts (6), screws (7), connector (8), and gasket (9) from box (4). Discard locknuts and gasket.

4.

Remove four locknuts (10), screws (11), dust cap (12), connector J137 (13), and gasket (14) from faceplate (3). Discard

locknuts and gasket.

5.

Disconnect four leads (15) from four binding posts (16).

6.

Disconnect three lead terminals (1) from connector J11 (2).

7.

Disconnect three terminals (1) from connector J12 (3).

8.

Disconnect three lead terminals (1) from connector J13 (4).

9.

Remove 12 screws (5), locknuts (6), three dust caps (7), connectors (2), (3), and (4), and gaskets (8) from faceplate

(9). Discard locknuts and gaskets.

10. Remove four screws (5), locknuts (6), J7 connector (10), and gasket (11) from box (12). Discard locknuts and gasket.

11. Remove two jamnuts (13) and connectors J9 and J10 (14) from box (12).

12. Remove two jamnuts (15) and connectors J113 and J114 (16) from faceplate (9).

13. Remove four screws (5), locknuts (6), connector J22 (17), gasket (18), and dust cap (19) from faceplate (9). Discard

locknuts and gasket.

14. Remove four binding posts (20) from faceplate (9).

15. Remove two locknuts (21), screws (22), and caps (23) from faceplate (9). Discard locknuts.

0089 00-2