TM-9-2350-261-34

CARRIER, M113A2, M577A2, M1064, M1068, M1059 AND M901A1

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-261-34 - Page 675 of 785

TM 9-2350-261-34

REPAIR TENT INTERFACE PANEL BOX ASSEMBLY A5 (M1068 ONLY) — Continued

0089 00

ASSEMBLY

1.

Install two catch assemblies (1), six screws (3), washers (4), and nuts (5) on box (6).

2.

Install two caps (7), screws (8), and new locknuts (9) on faceplate (10).

3.

Install four binding posts (11) on faceplate (10).

4.

Install connector J22 (12), new gasket (13), dust cap (14), four screws (15), and new locknuts (16) on faceplate (10).

5.

Install two connectors J113 and J114 (17) and jamnuts (18) on faceplate (10).

6.

Install two connectors J9 and J10 (19) and jamnuts (20) on box (6).

7.

Install connector J7 (21), new gasket (22), four screws (15), and new locknuts (16) on box (6).

8.

Install three connectors (23), (24), and (25), new gaskets (26), dust caps (27), 12 screws (15), and new locknuts (16)

on faceplate (10).

NOTE

Use wiring diagram (page 0089 00-6).

9.

Connect three lead terminals (28) on connector J13 (23).

10. Connect three lead terminals (28) on connector J12 (24).

11. Connect three lead terminals (28) on connector J11 (25).

0089 00-4