TM 9-2350-273-BD
TRACK AND SUSPENSION
Procedural Steps (Cont):
2. Cannibalized serviceable components, track, roadwheels, hubs, roadwheel arms,
sprockets, and hubs from any of the following vehicles:
a.
M60 Series.
b.
M48A5.
c.
M88A1.
d.
CEV 728.
e.
AVLB.
NOTE
Some components have different part numbers but will
interchange with M60/M48 components.
3. Roadwheels may be used from the M 1 tank but must be used in pairs due to the
smaller outside diameter.
4. Clean and lubricate replacement components.
5. Install components on the damaged tank.
6. Record the BDAR action taken. When the mission is completed, as soon as
practicable, repair tank using standard maintenance procedures.
9-18. ROADWHEEL ARM DAMAGED
General Information
If the roadwheel arm assembly has been damaged beyond use and the roadwheels are
missing, the remaining part of the roadwheel arm could interfere with the track.
Number one or number six must be in position.
Limitations:
●
Reduced stability
Personnel/Time Required:
●
2 soldiers
●
2-4 hours
Materials/Tool:
●
Welding equipment
9-13