TM 9-2350-277-10
REPLACE DRIVER’S/COMMANDER’S DISPLAY (DVE) — Continued
0035 03
4.
If commander’s display is not installed in vehicle, remove connector W2P2 from connector A1J2 and connector 516B
P2 from connector A1J1 on driver’s display .
5.
Stow cable connectors W2P2 and 516B P2 in dummy connectors on the side of the guide.
6.
While holding driver’s display, remove four knobs and driver’s display from bracket .
003503-3
Change 5