TM-9-2350-277-10

CARRIER, M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; OPERATOR’S MANUAL

TM-9-2350-277-10 - Page 352 of 889

TM 9-2350-277-10

INSTALL/REMOVE MACHINE GUN (M2, .50 CAL) (M113A3, M1059A3,

M1064A3, AND M58 ONLY)

0036 00

THIS WORK PACKAGE COVERS:

Install Machine Gun (page 0036 00-1).

Remove Machine Gun (page 0036 00-3).

INITIAL SETUP:

Maintenance Level

Operator

Personnel Required

Soldier

Equipment Condition

Engine stopped (WP 0024 00)

Commander’s cupola locked at desired position

(WP 0010 00)

INSTALL

NOTE

On some carriers the traverse travel lock is an arm on left side of machine gun mount. On other

carriers the traverse travel lock is a hinged lug on right side of machine gun pintle. Both are

shown. If your carrier is equipped with traverse travel lock arm, go to Step 1. If it is equipped

with traverse travel lock lug, go to Step 2.

1.

Remove pin from commander’s cupola mount to release traverse travel lock arm.

0036 00-1