TM-9-2350-277-10
CARRIER, M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; OPERATOR’S MANUAL
TM-9-2350-277-10 - Page 762 of 889
TM 9-2350-277-10
CHECK/REPLACE MISSING PLUG (M113A3 ONLY)
0099 00
THIS WORK PACKAGE COVERS:
Removal (page 0099 00-1).
Installation (page 0099 00-1).
INITIAL SETUP:
Maintenance Level
Operator
Tools and Special Tools
Flat tip screwdriver (WP 0102 00, Item 46)
Materials/Parts
Cleaning compound solvent (WP 0104 00, Item 6)
Personnel Required
Soldier
Equipment Condition
Engine stopped (WP 0024 00)
REMOVAL
NOTE
Armor mounting provision holes must be free of dust and dirt before plugs are installed.
1.
Remove plug from armor mounting provision hole. Use flat tip screwdriver.
2.
Clean armor mounting provision hole. If necessary, use cleaning compound solvent. Let surface air dry.
INSTALLATION
1.
Install new plug in armor mounting provision hole. Use flat tip screwdriver.
END OF TASK
0099 00-1/2 blank
Back to Top
