TM-9-2350-277-10

CARRIER, M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; OPERATOR’S MANUAL

TM-9-2350-277-10 - Page 754 of 889

TM 9-2350-277-10

CHECK/FILL COOLING SYSTEM — Continued

0097 00

WARNING

Hot radiator coolant can burn you. Use hand to remove cap only if cool to touch. Turn cap

slowly to release pressure. Replace cap by pressing down and turning cap until tight.

CAUTION

Adding coolant to an overheated engine could damage engine. Do not add coolant to an

overheated engine unless engine is running.

NOTE

Approved antifreeze coolant only may be added to radiator. In an emergency, water may be

added if speciﬁed coolant is not available.

5.

Remove radiator cap and check level of coolant. If coolant is hot, check that coolant reaches HOT FILL LEVEL in ﬁller

neck. If coolant is cold, check that coolant reaches COLD FILL LEVEL in ﬁller neck. Add coolant as needed.

6.

If water was added, ask unit maintenance to check antifreeze protection level.

0097 00-3