TM-9-2350-277-10
CARRIER, M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; OPERATOR’S MANUAL
TM-9-2350-277-10 - Page 748 of 889
TM 9-2350-277-10
SERVICE BILGE PUMPS — Continued
0096 00
2.
Remove six screws, washers and rear floor plate from floor supports. Use 1/2 inch drive socket wrench handle and 3/4
inch socket.
3.
Service rear bilge pump. Use flashlight.
4.
Remove mud and debris from bilge pump and strainer. If bilge pump needs additional cleaning, notify unit maintenance.
5.
Clean vent hole. Use a wire and run it back and forth in vent hole a few times.
009600-5
Change 5
Back to Top
