TM-9-2350-277-10
CARRIER, M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; OPERATOR’S MANUAL
TM-9-2350-277-10 - Page 746 of 889
TM 9-2350-277-10
SERVICE BILGE PUMPS — Continued
0096 00
7.
Clean vent hole. Use a wire and run it back and forth in vent hole a few times.
8.
Clean front bilge pump outlet line sight glass as needed. If sight glass must be removed to get it clean, notify unit
maintenance.
9.
Position bilge pump strainer on weld nuts and secure with two flat washers, lock washers and screws. Use cross tip
screwdriver.
009600-3
Change 5
Back to Top
