TM 9-2350-277-20-1
TRANSMISSION OIL LOW PRESSURE INDICATOR MALFUNCTIONS — Continued
0056 00
B2Y
1.
Remove cable assembly 12349858 circuit 367/27L plug (1) from
TRANS OIL LOW PRESS indicator assembly (2).
2.
Check continuity between cable assembly 12349858 circuit
367/27L plug (1) circuit 367 pin and ground.
3.
Is there continuity?
B2YN
1.
Remove jumper wire and install
harness 12349881 circuit 366 plug
on trans oil low press switch.
2.
Replace TRANS OIL LOW PRESS
indicator assembly (WP 0287 00).
3.
Verify no faults found.
B3Y
1.
Remove harness 12349881 circuits 367 plug (1) and 366A (2)
plug from parking brake switch jacks (3) and (4).
2.
Check continuity between parking brake switch jacks (3) and (4).
3.
Is there continuity?
B3YN
1.
Install harness 12349881 circuit
367/27L plug on TRANS OIL
LOW PRESS indicator.
2.
Remove jumper wire and install
harness 12349881 circuit 366 plug
on trans oil low press switch.
3.
Replace parking brake switch
(WP 0331 00).
4.
Verify no faults found.
005600-7
Change 5