TM 9-2350-277-20-1
TRANSMISSION OIL LOW PRESSURE INDICATOR MALFUNCTIONS — Continued
0056 00
B8Y
1.
Install harness 12349881 circuit 367 plugs on switch
and cable assembly 12345898.
2.
Replace TRANS OIL LOW PRESS indicator assembly
(WP 0287 00).
3.
Verify no faults found.
CY
1.
Remove jumper wire and install harness 12349810 on
trans oil low press switch.
2.
Remove instrument panel for access (WP 0295 00).
3.
Remove cable assembly 12349858 circuit 27 plug (1)
from circuit beaker (2).
4.
Remove harness 12349858 circuit 367/27L plug (3) from
TRANS OIL LOW PRESS indicator jack (4).
5.
Check continuity between harness 12349858 circuit 27 plug
(1) and circuit 367/27L plug (3) circuit 27L pin.
6.
Is there continuity?
CYN
1.
Install gasket, bulb, gasket, cover
lens on TRANS OIL LOW PRESS
indicator assembly.
2.
Replace special purpose cable
12349858 circuit 27L (WP 0290 00).
3.
Verify no faults found.
C2Y
1.
Install special purpose cable 12349858 on circuit breaker.
2.
Replace TRANS OIL LOW PRESS indicator (WP 0287 00).
3.
Verify no faults found.
005600-9
Change 5