TM-9-2350-277-20-1
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 1 OF 6
TM-9-2350-277-20-1 - Page 628 of 855
TM 9-2350-277-20-1
MSD/ICE TEST 26 FUEL FILTER PRESSURE DROP
0121 00
THIS WORK PACKAGE COVERS:
Test (page 0121 00-1).
INITIAL SETUP:
Maintenance Level
Unit
Personnel Required
Unit Mech 63T10
Helper
References
TM 9-2350-277-10
WP 0155 00
Equipment Condition
Engine stopped (TM 9-2350-277-10)
Vehicle blocked (TM 9-2350-277-10)
MSD/ICEhookeduptoDCA6(WP011700)
NOTE
After testing should you want to re-test, press Alt F4 to re-establish serial connection.
1.
Select
ICE Testing
from programs menu.
2.
Select button
1. Serial ICE
3.
Select button
1. ICE Tests
NOTE
All M113A3 variants are covered under
M113A3-M1068A3 APC
vehicle selection
4.
Select
M113A3-M1068A3 APC
, then select the
OK
button.
NOTE
Once MSD/ICE hook up screen
OK
button is selected, the MSD/ICE will perform a self test.
If self test fails, notify supervisor.
5.
Select
OK
button on the MSD/ICE hook up screen to proceed.
6.
Select
OK
button after successful self test.
7.
Follow on screen preparation for DCA offsets tests. Select
OK
button.
8.
Use Tab and Shift-Tab to move from one list box to another.
9.
Use spacebar to select/deselect the test.
10.
Select
26 Fuel Filter Press Drp
from
FUEL SYSTEM
list box. Select
Run Test(s)
button.
11. Start engine. See TM 9-2350-277-10.
12. Perform road test (WP 0155 00).
13. When engine RPM reaches 2400 during road test, press enter to run test. Have helper assist.
14. MSD should display
PASS
or
FAIL
.
a.
If error message appears, see TM 9-6625-2301-14&P.
15. Stop engine. See TM 9-2350-277-10.
16. Return to troubleshooting.
0121 00-1/2 blank
Change 5
Back to Top
