TM-9-2350-277-20-2

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 6

TM-9-2350-277-20-2 - Page 266 of 783

TM 9-2350-277-20-2

REPLACE EXHAUST EVACUATOR VALVE AND CONNECTOR — Continued

0175 00

3.

Loosen two clamps (8) securing hose (9) to evacuator valve (10) and air cleaner adapter (11). Slide hose (9) onto

evacuator (10).

4.

Remove two clamps (12) securing connector (13) to muffler (14) and evacuator valve (10). Discard clamps.

5.

Move air cleaner against power plant. Remove connector (13) and valve (10) from muffler (14). Separate connector

and valve. Remove clamps (8) and hose (9) from valve.

INSTALLATION

1.

Join valve (1) and connector (2). Install hose (3) on valve (1). Install clamps (4) and valve (1).

2.

Move air cleaner (5) against power plant. Install connector (2) and valve (1) on muffler (6).

NOTE

The position of the lettering may be within ± 1.5 inch (3.81 cm) of the top.

3.

Rotate valve (1) and connector (2) until the lettering is on the top and the drain is on the bottom.

4.

Secure connector (2) to muffler (6) and valve (1) with two new clamps (7).

0175 00-2

Change 5