TM-9-2350-277-20-2

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 6

TM-9-2350-277-20-2 - Page 270 of 783

TM 9-2350-277-20-2

CLEAN FUEL CAP VENT AND FILTER SCREEN — Continued

0176 00

NOTE

Carrier may have optional cap with pressure relief valve.

If fuel cap has pressure relief valve, do not perform this task.

1.

Open ballistic cover (1), and remove fuel cap (2) from ﬁller neck (3).

2.

Squeeze spring plate (4), and remove fuel cap (2), with attached chain (5), from ﬁller neck (3).

3.

Clean vent grommet (6) and screen cap (7) in fuel cap (2) as follows:

a.

Using pliers, pull on the tang in the center of screen cap (7), and remove screen cap from fuel cap (2).

NOTE

Do not remove internal ﬁlter screen from screen cap.

b.

Check vent grommet (6) to make sure it is clean, free from damage, and secure.

c.

If vent grommet (6) is damaged, replace entire fuel cap (WP 0184 00 or WP 0185 00).

0176 00-2

Change 1