TM-9-2350-277-20-2

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 6

  TM-9-2350-277-20-2 - Page 289 of 783

TM 9-2350-277-20-2
REPLACE FUEL TANKS (M577A3 AND M1068A3 ONLY)
0180 00
THIS WORK PACKAGE COVERS:
Removal (page 0180 00-1).
Installation (page 0180 00-4).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0926 00, Item 65)
Materials/Parts
Sealing compound (WP 0928 00, Item 56)
Key washers (6)
Locknut (4)
Personnel Required
Unit Mechanic
References
See your -10
Equipment Condition
Engine stopped (see your -10)
Carrier blocked (see your -10)
Ramp lowered (see your -10)
Battery ground lead disconnected (WP 0338 00)
Map board removed (see your -10)
Work tables removed (WP 0578 00) or (WP 0581 00)
and (WP 0582 00)
Fuel tanks drained (WP 0178 00)
Rear bilge pump discharge tube removed (WP 0634 00)
Fuel quantity transmitter removed (WP 0191 00)
Fuel tank access cover removed (WP 0188 00)
Fuel tank filler flange removed (WP 0189 00)
REMOVAL
1.
Disconnect four supply hoses (1) and four adapters (2) from fuel tanks (3) and (4).
2.
Loosen two clamps (5) and remove two supply hoses (6) from fuel tanks (3) and (4).
3.
Disconnect vent hose (7) from elbow (8).
4.
Disconnect vent hose (9) from elbow (10).
0180 00-1


Back to Top