TM-9-2350-277-20-2

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 6

TM-9-2350-277-20-2 - Page 534 of 783

TM 9-2350-277-20-2

REPLACE ENGINE EXHAUST ELBOWS AND DOUBLE FLEX JOINT — Continued

0221 00

INSTALLATION

1.

Install elbow (1) and clamp (2) on muffler (3).

2.

Install two V-clamps (4), new gaskets (5), and retainers (6) on double flex joint (7).

3.

Install double flex joint (7) and two clamps (4) on elbows (1) and (8).

4.

Install elbow (8) and clamp (9) on turbocharger. Tighten clamps (2) and (9).

5.

Rap clamp firmly with mallet while tightening nut and bolt on two clamps (4). TORQUE NUT TO 36-53 LB-IN (4-6

N·M). Use torque wrench.

FOLLOW-THROUGH STEPS

1.

Lower power plant grill (WP 0464 00).

2.

Close power plant access door. See TM 9-2350-277-10.

END OF TASK

0221 00-3/4 blank

Change 5