TM 9-2350-277-20-2
REPLACE EXHAUST MUFFLER AND BRACKET — Continued
0224 00
INSTALLATION
1.
Install bracket (9) on muffler (4) with pin (11) and new cotter pin (10).
2.
Install muffler (4) in carrier. Secure muffler and bracket (9) to sponson with two screws (6), new lockwashers (7), and
washers (8).
3.
Tighten clamp (5) securing muffler (4) to connector on air cleaner.
4.
Secure muffler (4) to hull bracket with two screws (1), four washers (2), and two new locknuts (3).
FOLLOW-THROUGH STEPS
1.
Install muffler extension and cap (WP 0223 00).
2.
Install exhaust elbows (WP 0221 00).
3.
Lower power plant grill (WP 0464 00).
4.
Close power plant access door. See TM 9-2350-277-10.
END OF TASK
0224 00-2
Change 5