TM-9-2350-277-20-2

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 2 OF 6

TM-9-2350-277-20-2 - Page 629 of 783

TM 9-2350-277-20-2

REPLACE VENTILATING FAN DRIVE BELT — Continued

0243 00

INSTALLATION

NOTE

All pulleys should rotate freely before installing new fan drive belt.

Readjust new drive belt after 25-50 miles (40.23–80.45 Km) of carrier operation.

1.

Position new fan drive belt (3) on pulleys.

2.

Adjust fan drive belt (WP 0242 00).

FOLLOW-THROUGH STEPS

1.

Start engine (see your -10).

2.

Check fan drive belt for proper operation.

3.

Stop engine (see your -10).

4.

Install generator belt (WP 0253 00).

5.

Adjust generator belt (WP 0252 00).

6.

Install fan drive pulley access cover (WP 0440 00).

7.

Install power plant rear access panels (see your -10).

END OF TASK

0243 00-2