TM-9-2350-277-20-3

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 3 OF 6

TM-9-2350-277-20-3 - Page 229 of 941

TM 9-2350-277-20-3

REPLACE STOP LIGHT-TAIL LIGHT AND GUARDS (ALL EXCEPT M577A3 AND

M1068A3) — Continued

0298 00

NOTE

Cable reel holder is only used on the right tank on the M1064A3 and M58.

6.

Place cable reel holder (6) (M1064A3 and M58 only) on bottom of guard. Secure with two screws (7), new

lockwashers (8), and washers (9).

7.

On right stop light-tail light, connect circuit 23 lead (10) and circuit 24 lead (11) to stop light-tail light (2).

8.

On left stop light-tail light, connect circuit 24 lead (12), circuit 22 lead (13), and circuit 21 lead (14) to stop

light-tail light (2).

FOLLOW-THROUGH STEPS

1.

Connect battery ground strap (WP 0337 00).

2.

Turn MASTER SWITCH ON (see your -10).

3.

Operate main light switches to check that left and right stop light-tail lights work properly (see your -10).

4.

Turn all switches OFF (see your -10).

END OF TASK

0298 00-6

Change 2