TM-9-2350-277-20-3

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 3 OF 6

TM-9-2350-277-20-3 - Page 224 of 941

TM 9-2350-277-20-3

REPLACE STOP LIGHT-TAIL LIGHT AND GUARDS (ALL EXCEPT M577A3

AND M1068A3)

0298 00

THIS WORK PACKAGE COVERS:

Removal (page 0298 00-1).

Installation (page 0298 00-4).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0926 00, Item 65)

Materials/Parts

Gasket

Lockwasher (6)

Personnel Required

Unit Mechanic

References

See your -10

Equipment Condition

Engine stopped (see your -10)

Carrier blocked (see your -10)

Battery ground strap disconnected

(WP 0337 00)

REMOVAL

NOTE

Except for number of circuit leads, left and right stop light-tail light and guards are replaced

the same way. Tag leads so you will know how to install them.

1.

On left stop light-tail light, disconnect circuit 21 lead (1), circuit 22 lead (2), and circuit 24 lead (3) from stop light-tail

light (4).

2.

On right stop light-tail light, disconnect circuit 24 lead (5) and circuit 23 lead (6) from stop light-tail light (7).

NOTE

To remove antenna support on the

M58 only (WP 0602 00). The M58 has only a left

antenna support.

Cable reel holder is only used on the right tank on the M1064A3 and M58.

3.

Remove two screws (8), lockwashers (9), washers (10), and cable reel holder (11) (M1064A3 and M58 only)

from guard (12) and external fuel tank. Discard lockwashers.

0298 00-1

Change 2