TM-9-2350-277-20-3

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 3 OF 6

TM-9-2350-277-20-3 - Page 322 of 941

TM 9-2350-277-20-3

REPLACE STEERING LOCK SWITCH — Continued

0330 00

INSTALLATION

1.

Remove forward jamnut (8) on new switch (9) by hand. Do not remove rear jamnut, lockwasher, and keyway washer.

2.

Install switch (9) into bracket (7), running jamnut down to bracket.

3.

Adjust switch (9) so plunger is fully depressed when steering is unlocked (transmission controller in any position except

SL). Tighten jamnuts (8) on switch.

4.

Install switch leads (3) and (4) with grommet (6) on bracket (7).

5.

Connect leads 369 and 369A (used on solenoid-activated lock) or leads 368 and 369A (used on cable-activated lock) (1)

and (2) to switch leads (3) and (4). Secure with new tiedown strap (5).

FOLLOW-THROUGH STEPS

1.

Install solenoid bracket (WP 0428 00) or control assembly bracket (WP 0429 00).

END OF TASK

0330 00-3/4 blank

Change 1