TM-9-2350-277-20-3

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 3 OF 6

TM-9-2350-277-20-3 - Page 434 of 941

TM 9-2350-277-20-3

REPLACE BATTERY TO MASTER SWITCH LEAD (CIRCUIT 6) (M113A3 AND

M1059A3 ONLY) — Continued

0356 00

4.

Route circuit 6 lead (1) through hull support channel (2).

5.

Install two clamps (3) on circuit 6 lead (1). Secure with two screws (4) and new lockwashers (5).

6.

Install new grommet (6) on circuit 6 lead (1). Route lead through side of front battery box (7).

7.

Install circuit 6 lead (1) and positive jumper lead (8) on positive terminal (9) of front battery. Secure with screw (10) and

nut (11).

FOLLOW-THROUGH STEPS

1.

Install battery access covers (see your -10).

2.

Connect battery ground strap (WP 0337 00).

3.

Close spall liners (see your -10).

4.

Start engine (see your -10).

5.

Raise and lock ramp (see your -10).

6.

Stop engine (see your -10).

END OF TASK

0356 00-5/6 blank

Change

Change 2