TM-9-2350-277-20-3
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 3 OF 6
TM-9-2350-277-20-3 - Page 428 of 941
TM 9-2350-277-20-3
REPLACE BATTERY BOX VENT FITTING (M58 ONLY) — Continued
0355 00
INSTALLATION
1.
Install hose (1) on battery box (2) with hose clamp (3).
2.
Apply a bead of sealing compound around hole (4) in vehicle hull (5).
3.
Align holes in battery box vent fitting (6) with holes in vehicle hull (5).
4.
Secure battery box vent fitting (6) on vehicle hull (5) using six new lockwashers (7), washers (8), and screws (9).
5.
Install hose (1) on battery box vent fitting (6) with hose clamp (10).
FOLLOW-THROUGH STEPS
1.
Start engine (see your -10).
2.
Raise and lock ramp (see your -10).
3.
Stop engine (see your -10).
END OF TASK
0355 00-3/4 blank
Change
Change 2
Back to Top
