TM 9-2350-277-20-3
REPLACE SMOKE GRENADE LAUNCHER WIRING HARNESS (M113A3,
M1059A3, AND M58 ONLY) — Continued
0366 00
17. Install cover (1) on connector (2).
18. Install insulator washer (3), washer (4), new lock washer (5), and nut (6) on bushing (7).
19. Install plug (8), gasket (9), pressure washer (10), spring washer (11), and packing retainer (12) on bushing (7).
20. Install washer (13), new lock washer (14), and nut (15) on bushing (7) inside carrier.
21. Assemble lead (16) and (17) (WP 0382 00).
22. Connect circuit 7 lead (16) and circuit 799 lead (17) inside carrier.
23. Repeat Steps 17 - 22 for opposite side of carrier.
FOLLOW-THROUGH STEPS
1.
Install base and plate (WP 0455 00).
2.
Close power plant access door. See TM 9-2350-277-10.
3.
Connect battery ground strap (WP 0337 00).
4.
Start engine. See TM 9-2350-277-10.
5.
Raise and lock ramp. See TM 9-2350-277-10.
6.
Stop engine. See TM 9-2350-277-10.
END OF TASK
0366 00-14
Change 5