TM 9-2350-277-20-3
REPLACE RIGHT HEADLIGHT WIRING HARNESS — Continued
0373 00
8.
Install two dummy plugs (11) and two shells (10) on leads 514 (8) and 515 (9). Secure shells (10) to existing wires
with two tie traps (7).
9.
Connect lead 25 (6) to horn (5).
10. Connect lead 20 (4) to marker lamp (3).
11. Bend and tape leads 17 (1) and 18 (2) as shown. Connect leads to service headlamps (12).
FOLLOW-THROUGH STEPS
1.
Lower power plant grill (WP 0464 00).
2.
Connect battery ground strap (WP 0337 00 or WP 0338 00).
3.
Close power plant access door. See TM 9-2350-277-10.
END OF TASK
0373 00-6
Change 5