TM-9-2350-277-20-4

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 4 OF 6

TM-9-2350-277-20-4 - Page 372 of 861

TM 9-2350-277-20-4

REPAIR SPALL LINER QUICK RELEASE PINS AND PLATES (M113A3 ONLY) —

Continued

0506 00

INSTALLATION

1.

Install plate (3) on track with two screws (10) and washers (11). TIGHTEN SCREWS TO 32-34 LB-FT (43-46 N

m)

TORQUE.

2.

Install plate (2) on track with two screws (8) and washers (9). TIGHTEN SCREWS TO 32-34 LB-FT (43-46 N

m)

TORQUE.

3.

Install lanyard (7) and quick release pin (1) on track with screw (4), new lockwasher (5), and washer (6).

4.

Install quick release pin (1) in plates (2) and (3).

FOLLOW-THROUGH STEPS

1.

Start engine (see your -10).

2.

Raise and lock ramp (see your -10).

3.

Stop engine (see your -10).

END OF TASK

0506 00-3/4 blank