TM-9-2350-277-20-4

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 4 OF 6

TM-9-2350-277-20-4 - Page 698 of 861

TM 9-2350-277-20-4

REPLACE MORTAR BASE STOWAGE BRACKET (M1064A3 ONLY) — Continued

0615 00

0615 00-3/4 blank

Change 2

2.

Install three spacers (11) rubber bumper (10), two screws (8), and flat washers (9), on mounting bracket (3).

3.

Install locking pin assembly (7.1), on mounting bracket (3).

INSTALLATION

1.

Install control handle (15), flat washer (14), new lock washer (13), and new lock nut (12) on mounting

bracket (3).

4.

Install mounting bracket (7) on exterior bulkhead with four washers (5), new lock washers (6) and screws (4).

5.

Install mounting bracket (3) on exterior bulkhead with three washers (2) and screws (1).

FOLLOW-THROUGH STEPS

1.

Install mortar base.

See TM 9-1015-250-10.

END OF TASK