TM-9-2350-277-20-4

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 4 OF 6

TM-9-2350-277-20-4 - Page 703 of 861

TM 9-2350-277-20-4

REPLACE LEFT SIDE RACK BASE (M1068A3 ONLY) — Continued

0616 00

7.

Position two work surface assemblies (16) under rack base (4). Secure with four washers (17), washers (18), screws (19),

and new locknuts (20).

8.

Install two springs (21) onto four bolts (1).

9.

Install two bumpers (22) and eight screws (23) on rack base (4).

10. Install two pins (13) in work surface assemblies (16).

FOLLOW-THROUGH STEPS

1.

Install printer mount (WP 0823 00).

2.

Install U.P.S. power extension box (WP 0822 00).

3.

Install A.C. and D.C. power extension boxes and mounts (WP 0834 00).

4.

Install electronic/communication equipment. See TM 11-7010-256-12&P.

5.

Start engine (see your -10).

6.

Raise and lock ramp (see your -10).

7.

Stop engine (see your -10).

END OF TASK

0616 00-4