TM 9-2350-277-20-5
REPLACE PERSONNEL HEATER ASSEMBLY (ALL EXCEPT M1064A3) — Continued
0703 00
FOLLOW-THROUGH STEPS
1.
Install heater hose on plenum (WP 0706 00).
2.
Install power plant rear access panel (see your -10).
3.
Connect battery ground strap (WP 0337 00) or
(WP 0338 00).
4.
Start heater (see your -10), or for heater with P/N 5000-30178 model A20 (see TM 9-2540-207-14&P).
Check heater for proper operation. Turn heater off.
5.
Secure spall liners (M113A3 only) (see your -10).
END OF TASK
0703 00-8
Change 3