TM-9-2350-277-20-5
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 5 OF 6
TM-9-2350-277-20-5 - Page 696 of 1047
TM 9-2350-277-20-5
REPLACE M8A3 NBC HOSES AND BRACKETS (M1059A3 ONLY)
0787 00
THIS WORK PACKAGE COVERS:
Removal (page 0787 00-1).
Installation (page 0787 00-4).
INITIAL SETUP:
Maintenance Level
Unit
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0926 00, Item 65)
Materials/Parts
Locknut (2)
Lockwasher (12)
Lockwasher (8)
Personnel Required
Unit Mechanic
References
See your -10
TM 3-6680-316-10
Equipment Condition
Engine stopped (see your -10)
Carrier blocked (see your -10)
Ramp lowered (see your -10)
Battery ground strap disconnected (WP 0337 00)
Power plant rear access panel removed (WP 0439 00)
REMOVAL
1.
Remove smoke generator operator’s hose (1) from connector (2) and two brackets (3).
2.
Remove screw (4), lockwasher (5), and connector (2) from support (6). Discard lockwasher.
3.
Remove two screws (7), lockwashers (8), and support (6) from vehicle top plate. Discard lockwashers.
4.
Remove four screws (9), lockwashers (10), and two brackets (3) from vehicle top plate. Discard lockwashers.
5.
Remove smoke generator operator’s hose (1), two screws (11), lockwashers (12), and clips (13) from top plate. Discard
lockwashers.
6.
Loosen clamp (14) and remove smoke generator operator’s hose (1) from top of transverse beam and disconnect from air
purifier (15).
0787 00-1
Back to Top
