TM-9-2350-277-20-5

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 5 OF 6

TM-9-2350-277-20-5 - Page 702 of 1047

TM 9-2350-277-20-5

REPLACE M3 NBC HOSES AND FITTINGS (M1059A3 ONLY)

0788 00

THIS WORK PACKAGE COVERS:

Removal (page 0788 00-1).

Installation (page 0788 00-5).

INITIAL SETUP:

Maintenance Level

Unit

Tools and Special Tools

General Mechanic’s Tool Kit (WP 0926 00, Item 65)

Materials/Parts

Grommet

Lockwasher (23)

Straps (as required)

Personnel Required

Unit Mechanic

References

See your -10

TM 3-6680-316-10

Equipment Condition

Engine stopped (see your -10)

Carrier blocked (see your -10)

Battery ground strap disconnected (WP 0337 00)

REMOVAL

1.

Loosen clamp (1) and remove hose (2) from connector (3) and adapter (4) on operator’s heater (5).

2.

If damaged, remove adapter (4) from operator’s heater (5).

3.

Remove four screws (6), lockwashers (7), and two brackets (8) from top plate. Discard lockwashers.

4.

Remove three screws (9), lockwashers (10), and clamps (11) from top plate. Remove clamps from operator’s inlet hose

(12). Discard lockwashers.

5.

Cut straps (13) that secure lead 537D (14) to operator’s inlet hose (12). Discard straps.

6.

Loosen clamp (15) and remove operator’s inlet hose (12) from adapter (16) on operator’s heater (5).

7.

If damaged, remove adapter (16) from operator’s heater (5).

0788 00-1