TM-9-2350-277-20-6

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 6 OF 6

TM-9-2350-277-20-6 - Page 120 of 487

TM 9-2350-277-20-6

REPLACE POWER DISTRIBUTION CABLE (W3) (M1068A3 ONLY) — Continued

0837 00

INSTALLATION

1.

Install new W3 cable (1) in carrier.

2.

Connect cable W3 plug P1 (1) to jack J1 (2) on power distribution box A3 (3).

3.

Install four clamps (4) on cable W3 and secure to hull weldnuts with screws (5).

4.

Install six new plastic cable straps (6) on cable W3.

5.

Connect cable W3 plug P3 (7) to jack J24 (8) on power distribution enclosure A1 (9).

FOLLOW-THROUGH STEPS

1.

Connect battery ground lead (WP 0338 00).

2.

Turn MASTER SWITCH to ON (see your -10). Check that electrical system works properly.

3.

Stop engine (see your -10).

END OF TASK

0837 00-3/4 blank