TM-9-2350-277-20-6
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL VOLUME 6 OF 6
TM-9-2350-277-20-6 - Page 97 of 487
TM 9-2350-277-20-6
CONVERT PRIMARY POWER INVERTER TO SLAVE (ALL EXCEPT
OUTBACK) — Continued
0830 01
2.
Turn the power switch (5) on the failed inverter to OFF.
CAUTION
Install W15 cable connector carefully and properly secure and snug with the attached screws.
Do not overtighten. An improperly connected or loose connector or missing screws may cause
the inverter to short circuit resulting in damage and failure to operate.
3.
Remove W15 cable connectors from inverters IN1 (7) and IN2 (6). Reconnect the red W15 cable connector to inverter
IN2 (6). Do not reconnect the black W15 cable connector.
4.
Install access cover (4) on inverter housing (3) and secure with ten screws (1) and new lockwashers (2).
FOLLOW-THROUGH STEPS
1.
Connect battery ground lead (WP 0338 00).
END OF TASK
0830 01-2
Change 5
Back to Top
