TM-9-2350-277-34
CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58
TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL
TM-9-2350-277-34 - Page 118 of 871
TM 9-2350-277-34
SERVICE UPON RECEIPT
0013 00
THIS WORK PACKAGE COVERS:
Check ing U npack ed Eq uip men t (p a ge 001 3 00- 1) .
INITIAL SETUP:
Maintenance Level
Direct Support
Tools and Special Tools
General Mechanic’s Tool Kit (WP 0120 00, Item 62)
Personnel Required
Track Vehicle Repairer 63H10
References
TM 9-6140-200-14
See your -10
See your -20
Equipment Condition
Engine stopped (see your -10)
CHECKING UNPACKED EQUIPMENT
1.
This section provides information on how to check and service your carrier when it is received.
Level B
and
A
deprocessing procedures are given in the following table.
Level B
deprocessing is performed when the carrier have been
in storage for less than ninety (90) days.
Level A
deprocessing is performed, in addition to Level B deprocessing, when
the carrier has been in storage for more than 90 days.
SERVICE UPON RECEIPT
LOCATION
ITEM
ACTION
REMARKS
LEVEL B
Hull
Driver’s Hatch
Remove welded nut/bolt from driver’s hatch to gain
vehicle entry.
Engine
Engine air intake
(1) Remove air restrictor plug from air duct at air filter.
(2) Connect filter host to air filter.
(3) Remove warning tag.
Engine
Fuel lines
(1) Connect fuel lines at quick disconnect.
(2) Connect fuel supply tubing.
Engine
Crankcase
Remove shipping tape from crankcase breather.
Engine
Oil level gauge
Remove shipping tape from oil level gauge rod opening.
Engine
Caps and plugs
Remove caps and plugs from all openings to engine that
vent outside.
Engine
Power plant access
panels
Install power plant access panels.
Hull
Carrier batteries
(1) Remove shipping tape from filler caps.
(2) Add electrolyte and charge batteries. See TM
9 -61 40-20 0-1 4.
Hull
Battery cables
Install cables on battery. See TM 9-2350-277-20.
Hull
Personnel
heater/feed line
(1) Remove shipping tape from heater external exhaust
and intake elbows.
(2) Remove shipping tape from end of disconnected fuel
feed line.
(3) Connect feed line to heater.
Hull
Fuel system
Fill fuel tank.
001300-1
Change 4
Back to Top
