TM-9-2350-277-34

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-277-34 - Page 123 of 871

TM 9-2350-277-34

PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS), INCLUDING

LUBRICATION INSTRUCTIONS — Continued

0014 00

7)

The sum found in Step 7a6 is your torque wrench setting. Set your dial.

NOTE

Setting the torque wrench dial at the reading found in Step 7a7 will deliver the required torque

at the end of your adapter.

Example: (Metric equivalents omitted for clarity).

1) 40 lb-ft required.

2) 12 inches.

3)12x40=480.

4) 4 inches.

5) 12 + 4 = 16 inches.

6) 480/16 = 30 lb-ft.

7) Torque wrench dial setting = 30.

Cleaning

8.

GENERAL CLEANING.

Cleaning is very important. All parts must be cleaned well and kept clean during

maintenance. Dirt or foreign matter can cause malfunctions and equipment failure. General cleaning procedures are

detailed in the following steps. Special cleaning procedures are covered in the task relating to the specific part. Clean

after repair and before assembly.

WARNING

Airpressureinexcessof30psi(207 kPa) can injure personnel. Do not direct pressurized air

at yourself or others. Always wear goggles.

CAUTION

Lyeorcausticsubstanceswilldamage metal surfaces. Do not use lye or caustic mixtures

to clean metal surfaces.

0014 00-4

Change 5