TM 9-2350-277-34
REPAIR ENGINE AND TRANSMISSION STAND — Continued
0070 00
3.
Raise support (10) and install wooden 2 x 4 (11) between frame rails (12). Rest support on 2 x 4.
4.
Remove cotter pin (13), washer (14), vee wheel (15), and washer (14). Discard cotter pin.
5.
Remove screw (1) and locknut (2) securing axle (3) to support (4). Remove axle. Discard locknut.
0070 00-4
Change 1