TM-9-2350-277-34

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-277-34 - Page 472 of 871

TM 9-2350-277-34

REPAIR ENGINE AND TRANSMISSION STAND — Continued

0070 00

11. Position transmission support (1) on beam assembly (2). Install short spacer (3), beam assembly, long spacer (4), screw

(5), and new locknut (6) on transmission support.

REPLACE DATA PLATE

1.

Remove four drive screws (7).

2.

Locate new data plate (8) in same area. Using plate as a template, drill four mounting holes 3/64 - 1/16 inch diameter.

3.

Install four new drive screws (7).

0070 00-13

Change 1