TM-9-2350-277-34

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-277-34 - Page 702 of 871

TM 9-2350-277-34

REPAIR TENT INTERFACE PANEL BOX ASSEMBLY A5 (M1068A3 ONLY) — Continued

0096 00

ASSEMBLY

1.

Install two catch assemblies (1), pads (2), six screws (3), washers (4), and nuts (5) on box (6).

2.

Install two caps (7), screws (8), and new locknuts (9) on faceplate (10).

3.

Install four binding posts (11) on faceplate (10).

4.

Install connector J22 (12), gasket (13), dust cap (14), four screws (15), and new locknuts (16) on faceplate (10).

5.

Install two connectors J113 and J114 (17) and jamnuts (18) on faceplate (10).

6.

Install two connectors J9 and J10 (19) and jamnuts (20) on box (6).

7.

Install connector J7 (21), gasket (22), four screws (15), and locknuts (16) on box (6).

8.

Install three connectors (23)(24)(25), gaskets (26), dust caps (27), 12 screws (15), and new locknuts (16) on

faceplate (10).

NOTE

Use wiring diagram page 0096 00–04.

9.

Connect three lead terminals (28) on connector J13 (23).

10. Connect three lead terminals (28) on connector J12 (24).

0096 00-5