TM-9-2350-277-34

CARRIER M113A3, M577A3, M1059A3, M1064A3, M1068A3 AND M58

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

TM-9-2350-277-34 - Page 775 of 871

TM 9-2350-277-34

REPAIR MSD/ICE DISTRIBUTION BOX — Continued

0109 00

10. Install cap (8) on connector J2 (9).

11. Secure chain (7) with screw (5) and new locknut (6).

WARNING

Adhesive, primer, sealant compounds, and isopropyl alcohol are toxic and flammable. These

compounds are toxic to eyes, skin, and respiratory tract. Continued exposure can make you

dizzy and irritate your eyes and throat.

Always use in well ventilated areas, away from heat, sparks, and flames. Do not breathe fumes.

Do not allow into contact with skin and eyes. Use goggles or face shield and protective gloves.

12. If required, cement gasket (4) to junction box. Apply a thin even coat of adhesive to both surfaces. Allow to dry until

tacky. Press surfaces together firmly.

13. Position cover (3) on gasket (4) and secure with ten washers (2) and screws (1).

FOLLOW-THROUGH STEPS

1.

Install MSD/ICE distribution box. See TM 9-2350-277-20.

END OF TASK

0109 00-6

Change 5