TM-9-2350-311-10

HOWITZER, MEDIUM, SELF-PROPELLED, 155MM; M109A2, M109A3, M109A4 AND M109A5

TECHNICAL MANUAL; OPERATOR’S MANUAL

NOVEMBER 1994

TM-9-2350-311-10 - Page 226 of 775

TM 9-2350-311-10

2-10 OPERATING PROCEDURES - CONTINUED

2-10.7

Operating Miscellaneous Items - Continued

e.

Cannoneer’s Seat Assemblies (M109A4/M109A5)

NOTE

Procedure is written for one cannoneer’s seat assembly, although it applies to both.

1

To lower cannoneer’s seat (11) to stowed position, push up in pin (12) area so two arms (13) fold and

lower cannoneer’s seat.

2

Attach strap (14) to floor so it is out of the way and secure during firing.

3

To raise cannoneer’s seat (11) to traveling position, remove strap (14) and lift until two arms (13) lock in

fully extended position. Push down in pin (12) area to lock arms. Strap attaches to floor and front of

cannoneer’s seat to prevent rattling and folding under.

NOTE

Cannoneer’s seat is illustrated in stowed position.

2-128