TM-9-2350-311-10

HOWITZER, MEDIUM, SELF-PROPELLED, 155MM; M109A2, M109A3, M109A4 AND M109A5

TECHNICAL MANUAL; OPERATOR’S MANUAL

NOVEMBER 1994

TM-9-2350-311-10 - Page 585 of 775

TM 9-2350-311-10

b. Procedure Number 2, M501 Series Fuze - Continued

5-6 FUZE SETTING -CONTINUED

2

Impact setting. Impact functioning of the M501 series MTSQ fuze may be obtained by leaving the S

(shipping mark) alined with the index mark on the base. The safety wire must be removed (pull free end

of safety wire off and out of hole) before firing or setting the M501 series fuze.

5-53