TM-9-2350-311-10
HOWITZER, MEDIUM, SELF-PROPELLED, 155MM; M109A2, M109A3, M109A4 AND M109A5
TECHNICAL MANUAL; OPERATOR’S MANUAL
NOVEMBER 1994
TM-9-2350-311-10 - Page 599 of 775
TM 9-2350-311-10
Change 4
5-64.3
g.
Procedure Number 7, M782 Fuze — Continued
(a) Press the right (
↑
↑↑
↑
) or left (
↓
↓↓
↓
) button to toggle between 0 and 1 for the hundreds digit, then press
the ENTER button. The cursor ( _ ) will move to the tens place.
Time Menu
000.0 sec
(b) Press the right (
↑
↑↑
↑
) or left (
↓
↓↓
↓
) button to choose a number between 0 and 9 for the ones digit, then
press the ENTER button. The cursor ( _ ) will move to the ones place.
Time Menu
030.0 sec
(c) Press the right (
↑
↑↑
↑
) or left (
↓
↓↓
↓
) button to choose a number between 0 and 9 for the ones digit, then
press the ENTER button. The cursor ( _ ) will move to the tenths place.
Time Menu
035.0 sec
(d) Press the right (
↑
↑↑
↑
) or left (
↓
↓↓
↓
) button to choose a number between 0 and 9 for the tenths digit, then
press the ENTER button. The Fuze Setting Menu appears with the cursor pointing to the TIME line
(showing the set time).
Fuze Setting Menu
FUZE:
M782
MODE: TIME
➔
TIME:
35.2 sec
SET FUZE
(e) Press the left (
↓
↓↓
↓
) button to move the cursor (
→
→→
→
) to indicate SET FUZE. Place setter on the fuze
and press the ENTER button. The setter will attempt to set the fuze. After the “WAIT” message is
briefly displayed either the “FUZE SET OK” message will be displayed which means the fuze has
been set, or the “FAILED” message will be displayed. . If “FAILED” appears, try setting another
fuze. If both fuzes do not accept the setting, replace the fuze setter and try setting the fuzes.
4
Setting for TIME (TIME) mode using PIAFS M1155
NOTE
When the setter is first initialized it displays the Fuze Menu, afterwards it remembers where
it was last and displays the Fuze Setting Menu and the last fuze set.
(a) Press the ENTER button to turn on the setter
Fuze Setting Menu
➔
FUZE:
M782
MODE: TIME
TIME:
187 sec
SET FUZE
(b) Press the right (
↑
↑↑
↑
) or left (
↓
↓↓
↓
) button to move the cursor (
→
→→
→
) to indicate FUZE, then press the
ENTER button. The Fuze Menu appears.
Fuze Menu
➔
M762
DM-52
M767
DM-74
M782
*MORE*
C32
*QUIT*
(c) Press the right (
↑
↑↑
↑
) or left (
↓
↓↓
↓
) button to move the cursor (
→
→→
→
) to indicate M782, then press the
ENTER button. The Fuze Setting Menu appears with the cursor pointing to the MODE line.
Fuze Setting Menu
➔
FUZE:
M782
MODE: TIME
TIME:
187 sec
SET FUZE
Back to Top
