TM-9-2350-311-10

TM-9-2350-311-10 - Page 615 of 775

TM 9-2350-311-10

Change 4

5-78.1/(5-78.2 blank)

5-13

STORAGE — CONTINUED

c. Provisions — Continued

Store M110 series and M825 WP projectile nose up. This restriction does not apply to the new M825A1

WP projectiles.

Store ammunition and primer containers with top side up. Labels or marking on boxes and containers

indicate which side should be up.

Loose Projectile Restraint System (LPRS)

Use of the LPRS is optional, and the components are:

Panel, Long, LPRS, 155MM (item 31, Appx D)

Panel, Short, LPRS, 155MM (item 32, Appx D)

Rack Assembly, 15 Round, LPRS, 155MM (item 34, Appx D)

Strap, Webbing, 1.75 Inch W. (item 36, Appx D)

Strap, Webbing, Tie Down, Cargo, Aircraft (item 37, Appx D)

Nylon, 1.719 Inch W.

(item 30, Appx D)

The LPRS (1) is a divider rack that provides a fast, simple method of securing “loose” unfuzed projectiles

(2) for transportation with field artillery companion vehicles. The divider rack restrains projectiles from

excessive longitudinal and lateral movement and from contact with other projectiles. The divider rack is

easily assembled as shown below, using a quantity of short dividers (3) and/or long plastic dividers (4)

that fit together. Projectiles are then placed vertically in the divider rack, with the base of each projectile

resting on the floor of the vehicle. The assembly is then secured to the sidewall of the vehicle by means

of cargo tiedown straps. After use, the rack may be disassembled and stored for reuse.