TM 9-2350-311-20-1
14-9 HEATER CONTROL BOX
This task covers:
a. Removal
b. Installation
General mechanic’s tool kit (item 64, Appx H)
Lockwashers (2) (item 71, Appx G)
a. Removal
1 Disconnect plug (1) at heater control box (2).
2 Disconnect connector (3) at control box (2).
3 Remove two nuts (4), two Iockwashers (5), and control box (2). Discard Iockwashers.
b. Installation
1 Install heater control box (2), two new Iockwashers (5), and two nuts (4).
2 Connect connector (3) at control box (2).
3 Connect plug (1) at control box (2).
14-16