TM-9-2350-311-20-1

HOWITZER, MEDIUM, SELF-PROPELLED, 155MM; M109A2, M109A3, M109A4 AND M109A5

TECHNICAL MANUAL; UNIT MAINTENANCE MANUAL FOR HULL, POWERPLANT, DRIVE CONTROLS, TRACKS, SUSPENSION, AND ASSOCIATED COMPONENTS

AUGUST 1994

  TM-9-2350-311-20-1 - Page 187 of 1275

TM9-2350-311-20-1
CONTINUED FROM STEP A
Bring transmission oil to proper Ievel (TM
9-2350-311-10).
NOTE
If oil level is low, check transmission
seals, plugs, gaskets, and lines for oil
leaks. Correct cause of leaks if within
scope of unit maintenance. If repairs are
beyond scope of unit maintenance, notify
support maintenance.
Check oil to see if oil appears milky or
contaminated (TM 9-2350-311-10).
I Is oil burnt or contaminated?
I
Send oil sample to AOAP and notify
support maintenance.
C
Check for improperly adjusted or disconnected
shift control Iinkage (para 9-9).
Is shift control linkage connected and properly
adjusted?
Reconnect and/or adjust shift
control linkage as required (para
9-9).
CONTINUED ON NEXT PAGE
3-87


Back to Top