TM9-2350-311-20-1
6-8 ENGINE-DRIVEN FUEL PUMP —
CONTINUED
c. Installation
Do not smoke or use open flame when working on fuel system. An explosion may
occur, causing severe injury or death.
1 Install fork coupling (12), new gasket(11 ), and fuel pump (1 0).
2 Install three washers (9) and three screws (8).
3 Install elbow (7) and connect engine-driven fuel pump-to-secondary fuel filter tube (6).
4 Connect engine-driven fuel pump-to-electric fuel pump hose (5).
5 Install tee (4) and connect primary fuel filter-to-engine-driven fuel pump tube (3).
FOLLOW-ON MAINTENANCE:
Install exhaust crossover tube (para 6-15)
Install front slope plate (para 4-5)
Install exhaust grille (para 4-5)
Install radiator fan access door (para 4-5)
Close air intake grille (para 11-8)
6-22
WARNING
NOTE