TM-9-2350-311-34-1

HULL, POWERPLANT, DRIVE CONTROLS, TRACKS, SUSPENSION, AND ASSOCIATED COMPONENTS: HOWITZER, MEDIUM, SELF-PROPELLED, 155MM

TECHNICAL MANUAL; DIRECT SUPPORT AND GENERAL SUPPORT MAINTENANCE MANUAL

SEPTEMBER 1994

TM-9-2350-311-34-1 - Page 247 of 352

TM 9-2350-311-34-1

3 Remove four nuts (9), four Iockwashers (10), and four electrical leads (11 ) from noise filter terminals (1 2).

Discard Iockwashers.

4 Remove Iockwire (13), four screws (14), four flat washers (15), ground wire (16), and noise filter (8). Discard

Iockwire.

5 Remove Iockwire (17), four screws (18), and four flat washers (19) at front of housing (20). Discard Iockwire.

6 Remove grommet (21). Discard grommet.

7 Feed electrical leads (11 ) through grommet hole (22) and remove motor assembly (23).

8 Remove two screws (24) and two electrical brushes (25).

9 Remove two screws (26) and end cover (27).

9-3